SecurityMan IPCAM-SD Bedienungsanleitung

IPcam-SD User’s ManualWiFi Security Camera for Smartphone, Tablet, and Computer

6We strongly recommend that you plug in and configure your IPcam-SD prior to mounting it. NOTE: The IPcam-SD must be configured through a “wired” Ethern

96J. Cloud - used to enable/disable Serial ID service for easy remote access.K. OK - saves the changes.L. Cancel - exits the menu without saving the c

97DDNSThe DDNS (Dynamic DNS) service consist of settings that must be configured if you wish to use a registered DNS connection to remotely access/vie

NTPThe NTP option allows configuration to update and automatically synchronize the date and time using network time protocol in your local area networ

UPNP The UPNP is used to enable universal plug and play for Point-to-Point remote access. Enabling the UPNP will automatic detect the HTTP port (80),

FTPThe FTP service allows you to enable (checked) or disable (unchecked) the FTP file transfer services. Double click on this option to bring up its c

101For example: open VLC in this example and choose Media>Open Network Steam...> as shown below.In the Network Steam window, input “rtsp://192.1

102OKThe OK button saves your changes and exits back the previous screen.CANCELThe CANCEL button discards any changes made and exits back to the previ

103A. CAM Name - allows you to rename the camera name.B. Anti-jitter - allow the camera lens to have stability when it is moving.C. Transparency - Not

104MIRROR IMAGEThe MIRROR IMAGE option allows you to reverse the image from left to right and right to left as if you are looking into a reverse mirro

105• • • ADVANCEDThe ADVANCED menu located in the IPcam Config settings allows you to configure the IPcam-SD’s advanced features such as SD card manag

71. Insert the Installation CD into the CD-ROM drive, and double click the “Open folder to view files” option from the the AutoPlay window.2. Next

106• • • •SD CARD MANAGEThe SD CARD MANAGE sub-menu located in the “Advanced” menu option consists of 6 settings that are used to manage the memory ca

107SNAPSHOTThe SNAPSHOT option is used to convert the selected partition into a snapshot partition. A snapshot partition is required for the IPcam-SD

108CANCELThe CANCEL button discards any changes made and exits back to the previous screen.• • • •IPCAM/CMS ACCOUNTThe IPCAM-SD USER ACCOUNT sub-menu

109DISPLAY WINDOWThe DISPLAY WINDOW displays all the active user accounts that you had created. The “admin” and “guest” accounts are pre-generated by

110MODIFY PW.The MODIFY PW. option is used to modify previously created user passwords. Once selected, a “Modify PW.” pop up screen will be displayed

111ADD USER The ADD USER button allows you to create new IPcam-SD user accounts. To create a new user, click on the “Add User” button to bring up the

112ADD GROUPThe ADD GROUP button allows you to create a new user group based on what you want users who are assigned to a specific group to do. For ex

113CANCEL The CANCEL button discards any changes made and exits back to the previous screen. • • • •MAINTENANCEThe MAINTENANCE configuration sub-menu

ABCDEFGHIJ K114DELETE FILES (SD)The DELETE FILES (SD) consists of 2 options that let you specify when you would like the IPcam-SD to free

115A. Select all – Select all options and then click on the OK button to reset the system settings to the manufacturer default settings.B. General – P

84. Input the user name and company name. Then click “Next” to continue as illustrated above.5. The default Install CMS directory is C:\Program Fi

116IMPORT (cfg)The IMPORT (cfg) feature allows you to load pre-saved configuration/settings to the IPcam-SD in cfg format. To import configuration, c

117of any configuration options or settings. The reboot option is used simply to reboot your IPcam-SD. To reboot the IPcam_SD, click on the reboot me

118• • • INFOThe INFO menu located in the IPcam Config settings is provides you with memory, log and version information and consists of the following

119• • • •LOGThe LOG sub-menu located in the “Info” menu is a feature that allows you to view important events that have occurred over time and also a

120 A. Type (drop down) – allows you to choose the event type to look in.B. Start Time – used to specify a specific start date/time to search between.

121DETAIL SCREENThe DETAIL SCREEN displays detailed information on search results that were found and varies based on the “type” search parameter that

122• • • •VERSIONThe VERSION sub-menu located in the “Info” menu displays specific IPcam-SD device information. This information includes: • Record Ch

123PLAYBACK Selecting the PLAYBACK option from the menu area of the CMS interface will bring up the PLAYBACK window which will allow you search, playb

124• IPCam Playback TabTo start playing back recorded video footages/photos form the IPcam-SD, select “IPCam Playback”, under “IPCam” select the desir

125NOTE: To search “By Time” you must select the “Select All” and then click on the “Add” button so that “CAM1” is added into the category under “Mul

9IPcam-SD IP Address Setup1. Double-click on the “CMS” short-cut icon on your desktop. Select “English” or other languages and then click “OK” to adv

126• PC Playback TabTo start playing back recorded files on local PC or from backup files, please select the PC playback tab. Next click on “PLAY/OPE

127Remote AccessRemote accessing the IPcam-SD from the web or using the CMS software provided are plug and play. By default, the IPcam-SD is plug and

128Internet Explorer Remote Access1. Obtain LAN IP address and port. In CMS software, click “System”->”Remote Config”->”Network”, and it displ

1293. Open the IE Browser, in this demonstration we are using IE 9.0. Go into the “Tool” and then click on the “Internet Options”. Next, click

130 5. “Bit Rate Type” window will appear. Users can choose “Connect all video (Main Stream)”, or “Connect all video (Extra Stream”, or just lea

131SMARTPHONE REMOTE ACCESS (iPhone, iPad/Tablet)1. Open the App Store and search for “vMEyeV2” as shown in IMAGE #1 and then select the “vmeyev

1323. Open the IE Browser, in this demonstration we are using IE 9.0. Go into the “Tool” and then click on the “Internet Options”. Next, click o

1336. When finish, tap the “SAVE” button located at the top right corner of the screen [IMAGE #11]. The newly added device name will now displayed

BUTTONNAMEACTIONStarts and Stops the live view feed from the selected live view display box.Takes a snap shot of the current screen.*Images are saved

135SMARTPHONE REMOTE ACCESS (ANDROID)Please make sure that you have successfully set up PortForwarding and that your IPcam-SD can be viewed over the i

105. In “Add/Remove IPCam” window, click to highlight “Demonstration” then click “ADD DEVICE” to open “Edit” device window as shown below.6. In “Edi

1363. Once the application has been successfully installed, select “Open” [IMAGE#5] or simply tap on the vMEye icon that was created [IMAGE #6] to

1376. The ‘Device Detail” screen [IMAGE #11] consist of the following configuration options:• DeviceName – the device name does not need to match any s

138 7. When you are done, select the “OK” button located on the top right corner of the screen [IMAGE #12] and your device will

1398. There are 3 ways you can initiate the live view. You can select the IPCAM-SD from the list screen as shown in IMAGE #14 and then select the

BUTTON NAME ACTIONStarts and Stops the live view feed from the selected live view display box.Takes a snap shot of the current screen.*Images are save

IMAGE #1IMAGE #2IMAGE #3141SMARTPHONE REMOTE ACCESS (BLACKBERRY)1. Download VMeye from App World, or acquire the app from the CD. At App World, s

FUNCTION KEY NAME FUNCTION DESCRIPTIONThe procedure to start broadcasting a video cameraTo snap a picture document appearing in the camera and save in

143Smartphone Remote Access (Windows Mobile)1. Connect Windows Mobile phone to the computer. 2. Insert the IPCam-SD software CD to your CD/DVD-ROM d

144P2P Remote AccessOpen the Internet Explorer Browser and type http://www.xmeye.net in the URL to register for a user name and a password or select c

145 After logging in, click “Device Manager” and then “Add” as illustrated below. Input the MAC address that was jotted down in step 8, give it a Devi

11NOTE: Repeat Steps 2 ~ 9 to setup IPCam-SD wireless connection. Be sure to select the Wifi IP address in step 9 to complete Wifi setup.NOTE: please jo

146TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP, DNS, DDNS, NTP, UPNP, and RTSP. Unlimited number of users; up to 8 simultaneous login use

122. To record video files to your computer, click “System”, and then click “PC Config”.3. In “PC Config” window under “Base Config”, the default direct

13CMS Graphic User Interface A. Device Display AreaThe DEVICE DISPLAY AREA lists all the devices (IPcam-SD’s) that are accessible through the CMS sof

14E. Vertical ExpandClicking on the VERTICAL EXPAND will hide the operation log area giving you a larger view of your cameras live feed.F. Operation

15Menu AreaThe MENU AREA is located at the bottom right corner of the CMS interface and is designed to give you quick access to the most commonly used

© Copyright 2013This manual is furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitte

16PTZ Selecting the PTZ option from the menu area of the CMS interface will bring up the PTZ control window which will allow you to maneuver and contr

17D. PresetThe PRESET bar allows you to create up to 255 preset camera points/positions. By creating a preset point you can have the IPcam-SD memori

18ColorThe COLOR menu consists of settings that will allow you to control the picture quality of your IPcam-SD. To access the color control menu simpl

19SystemThe SYSTEM menu consists of settings that will allow you to configure CMS features and options such as adding/removing cameras, creating users

20• PC CONFIGPC Config consists of four tabs that are used to configure how the CMS software will work in conjunction to your computer. These categori

21• • BASE CONFIGThe “Base Config” tab located in the PC Config settings consists of 6 categories that will let you configure how the CMS software wil

22• • • LOG MAINTENANCEThe LOG MAINTENANCE area located on the Basic Config tab consists of 3 settings that are used to configure the CMS log paramete

23• • • SNAPSHOTThe SNAPSHOT area located on the Basic Config tab consists of 2 settings that are used to configure the CMS snapshot parameters. These

24• • • LOCAL RECORDThe LOCAL RECORD area located on the Basic Config tab consists of a record directory feature that allows you to specify the locati

25• • • DEVICEThe DEVICE area located on the Basic Config tab consists of 2 settings that are used to configure the actions to be taken every time the

Table of ContentsIntroductionFeaturesImportantRestrictionsConditionsPackage contentsProduct BasicsCamera Setup Software (CMS) InstallationIPcam-SD IP

26• • • SYNC TIME WITH PCThe SYNC TIME WITH PC option area located on the Base Config tab allows you to specify how often the CMS should update its da

EnglishSpanishFrench27LanguageRun On Start UpMinimize On Start UpAutomatically Connect With LastMonitoring ChannelAutomatic Lock ScreenPassword Is Req

28RUN ON START UPThe RUN ON STAR TUP feature allows the CMS to automatically run whenever the computer is turned on or restarted. If this option fail

29• • ALARM SETTINGThe “Alarm Setting” tab located in the PC Config settings consists of 4 Alarm related tabs that will let you configure how the CMS

30• • • I/O TRIGGERThe I/O (input/output) TRIGGER tab located on the Alarm Setting tab consists of 8 settings that are used to configure how the CMS w

31DEVICE LISTThe DEVICE LIST displays all the devices (IPcam-SD) that are configurable by the CMS and currently established connection.ALARM ENABLE

32

33• • • VIDEO MOTIONThe VIDEO MOTION tab located on the Alarm Setting tab consists of 6 settings that are used to configure how the CMS will operate w

34DEVICE LISTThe DEVICE LIST displays all the devices (IPcam-SD) that are configurable by the CMS and currently established connection.VIDEO MOTION EN

35• • • VIDEO BLINDThe VIDEO BLIND tab located on the Alarm Setting tab consists of 4 settings that are used to configure how the CMS will operate whe

Domain Cloud Edit Device Add Device Example How to Add the IPcam-SD to the CMS Modify Delete Import Config Export Config Connec

36DEVICE LISTThe DEVICE LIST displays all the devices (IPcam-SD) that are configurable by the CMS and currently established connection.VIDEO BLIND ENA

37• • • DEVICE DISCONNECT The DEVICE DISCONNECT tab located on the Alarm Setting tab consists of 3 settings that are used to configure how the CMS wi

ABCEF38SOUND FILE PATHThe SOUND FILE PATH feature allows you to specify the location (on your computer) of the audible alert tone that you would like

39• • • BASIC SETTINGSThe BASIC SETTINGS area consists of the following:OVERWRITEThe OVERWRITE option allows you to enable the CMS to record continuou

40NOTE: you can use the same plan for each day of the week by clicking on the “All” button.• • • PLAN TEMPLATE WINDOWThe PLAN TEMPLATE WINDOW area loc

41EDIT TEMPLATEThe EDIT TEMPLATE button located on the Record Setting tab lets you edit any of the pre-configured plan templates and even create a new

42PLAN TEMPLATE SCREENThe “PLAN TEMPLATE SCREEN” consists of 9 options/settings that will allow you to edit, create and delete plan templates as neede

43NAMEThe NAME EDIT box allows you to create/edit the current plans name tag. For example if you wanted to rename “AllDay” to “Continuous” (for 24hr

44MODIFYThe MODIFY button allows you to modify an existing plan template. For example if you wanted to rename “AllDay” to “Continuous” (for 24hr recor

45• IPCAM/CMS ACCOUNTThe IPCAM/CMS Account option consists of 2 tabs that will allow you to create, modify or delete users and their permissions. Plea

1IntroductionStay connected wherever you go with the SecurityMan IPcam-SD. You can remotely access your IPcam-SD from anywhere in the world; monitor y

46• • GROUPThe “Group” tab located in the CMS Account settings consists of 4 categories/options that will let you create user groups with specific rig

47• • • ADD GROUPThe ADD GROUP button allows you to create a new user group based on what you want users who are assigned to a specific group to do. F

48NOTE: You can enable a specific right/privilege to all cameras that are connected to the CMS by checking the box located to the left of the rights l

49• • USER The “User” tab located in the CMS Account settings consists of 4 categories/options that will let you create, delete and modify CMS user ac

50• • • DELETE USERThe DELETE USER button allows you delete any of the user accounts that are no longer needed. To delete, simply highlight the user a

ABCDEFGHI51• LOCAL LOGThe Local Log is a feature that allows you to view important events that have occurred over time and also allows you to search f

52• • OPERATION/ALARMThe OPERATION/ALARM drop down allows you to search for a specific event type based on the event group selected from the log type

53• • SEARCHThe SEARCH option initiates the search. Once selected, the CMS will begin its event search based on the parameters that you have selecte

54ADD/REMOVE IPCAMThe Add/Remove IPCam screen consists of 8 options that will allow you to add or remove IPCam-SD units to and from the CMS. These opt

55• • AREA LISTThe “AREA LIST” window displays the entire CMS tree (devices that have been added) which allows you to choose which device/area you wou

2RestrictionsWhen using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow al

56• • ADD DEVICEThe ADD DEVICE option is your primary tool used to add cameras to the CMS. Clicking on the Add Device button will bring up the “EDIT”

57• • • DEVICE LISTThe DEVICE LIST window displays all the devices found whenever the “IP Search” option is initiated. • • • IP SEARCHThe IP SEARCH op

58• • • ZONEThe ZONE edit box lets you specify the zone that the IPcam-SD will belong to. NOTE: The zone will automatically be chosen based on the zo

59The “AutoGetAddr” button can be of help to obtain the correct IP address, Subnet Mask, and Gateway of your local area network settings. If you are

60Next, make sure your IPcam-SD is connected to your network and turned on. Select the area you created (HOME) and click on the “ADD DEVICE” option to

61Click on the “IP Search” button so that the CMS can search for your camera and display it in the “device list window” as shown in the image below.NO

62Click OK to close the EDIT window and click ok once more to close the Add/Remove IP Camera window as illustrated.

63The final step is to connect to your camera by expanding (double click) the group located in the device tree, expanding the IP address associated wi

64IPCAM CONFIGThe changes made under the “IPCAM CONFIG” section only affect how the IPcam-SD will operate as a “standalone” unit.The “IPCam Config” se

65• • DEVICE LISTThe DEVICE LIST area displays all the IPcam-SD’s that can be configured throughthe CMS.NOTE: You will be prompted to select a device

3ConditionsPlease read the following messages to make sure your working environment is suitable.• Please read the following messages to make sure your

1234566• • MAIN MENU ICONSThe MAIN MENU ICONS area displays all the menu options that are available in configuring your IPcam-SD. These options includ

67• • • RECORD/PLAYBACKThe RECORD/PLAYBACK menu located in the IPCam Config settings allows you to configure the IPcam-SD’s video and snapshot recordi

E FG HI68• • • • VIDEOThe VIDEO sub-menu located in the “Record” menu option consists of 9 settings that are used to configure the IPcam-SD’s vide

69CHANNELThe CHANNEL selection is defaulted to channel 1 and cannot be selected.LENGTHThe LENGTH is the recording duration area used to specify the ma

E FGH I70• • • • SNAPSHOTThe SNAPSHOT sub-menu located in the “Record” menu option consists of 9 settings that are used to configure the IPcam-SD’s ph

71CHANNELThe CHANNEL selection is defaulted to channel 1 and cannot be selected.PRESNAPThe PRESNAP option is used to specify the amount of photos that

72• • • ALARM The ALARM menu located in the IPcam Config settings allows you to configure the IPcam-SD’s event based recording parameters and consists

J K L M N73• • • • VIDEO MOTIONThe VIDEO MOTION sub-menu located in the “Alarm” menu option consists of 14 settings that are used to configure the IPc

74CHANNELThe CHANNEL selection is defaulted to channel 1 and cannot be selected.ENABLEThe ENABLE option is used to enable (checked) and disable (defau

75NOTIFICATION AREA The NOTIFICATION AREA lets you specify how you (the user) would like to be notified when and if a motion detection event occurs. T

4Package ContentsCeiling/Wall mount bracket (with screws)2 x Mounting bracket (IPcam-SDX2, screws)CD (PC software and manual)IPcam-SD2 x IP cameras (I

76• • • •VIDEO BLINDThe VIDEO BLIND sub-menu located in the “Alarm” menu option consists of 13 settings that are used to configure how the IPcam-SD wi

77CHANNELThe CHANNEL selection is defaulted to channel 1 and cannot be selected.ENABLEThe ENABLE option is used to enable (checked) and disable (defau

78 NOTE: Sending email can only attached pictures only, not video.• FTP – streams the event to your FTP site, supporting both video and

79• • • • ALARM INPUTThe ALARM INPUT sub-menu located in the “Alarm” menu option consists of 12 settings that are used to configure how the IPcam-SD w

80CHANNEL The CHANNEL selection is defaulted to channel 1 and cannot be selected.ENABLEThe ENABLE option is used to enable (checked) and disable (defa

81• Normal Open – used when the input device is normally open status by default, please reference the input device specification.

82 Notice the “Status” is automatically checked whenever “On” is selected.• C. Off - disables the alarm output port.• D. OK - saves the

83• • • •ABNORMALThe ABNORMAL sub-menu located in the “Alarm” menu option consists of 6 settings that are used to enable the IPcam-SD’s memory and net

84• • • SYSTEM The SYSTEM menu located in the IPCam Config settings allows you to configure the IPcam-SD’s basic system parameters (which should be co

85• • • •GENERALThe GENERAL sub-menu located in the “System” menu option consists of 11 basic settings. These settings include:A. System Time – used t

5Product BasicsInfrared LEDsLight SensorCamera LensFront ViewNetwork Port Antenna Mount Micro SD SlotPower SocketAlarm In/OutSpeakerMicrophoneRear Vie

86SYSTEM TIMEThe SYSTEM TIME option provides you with options that will allow you to set and configure the IPcam-SD’s current date and time. DATE FOR

87VIDEO STANDARDThe VIDEO STANDARD option refers to the two most commonly used video formats: • NTSC - National Television System Committee (NTSC) is

88• • • •ENCODEThe ENCODE sub-menu located in the “System” menu option consists of 15 basic settings that will allow you to adjust the IPcam-SD’s vide

89CHANNELThe CHANNEL selection is defaulted to channel 1 and cannot be selected. COMPRESSIONThe IPcam-SD standard COMPRESSION format is H.264 and is n

90be displayed if VBR is chosen from the Bit Rate Type drop down selection. The higher the quality set, the more bandwidth used and vice versa. The q

91• • • •NETWORKThe NETWORK sub-menu located in the “System” menu option consists of 14 basic settings related to your network that will allow you to

92NET CARDThe NET CARD select drop down is used to select the type of network connection that will be used/configured to connect your IPcam-SD to your

93from one of your local area network computer. To obtain the subnet mask go to the computer that is on your local area network. Go to the command pro

94• Fluency Preferred – select this option if you preferred the IPcam-SD as priority and consider quality second when remote accessing

ABCDEFGHIJK L95• • • •NET SERVICEThe NET SERVICE sub-menu located in the “System” menu option consists of 12 settings related to m